First cuts
Important note! As computer systems usually aren´t working
seamlessly and system “crashes” can be very annoying, we
recommend you save your work frequently, especially after extensive
changes have been made. You should get used to this procedure to
prevent data losses in case of a system “crash”.
DV recordings with Video Capture 6.0.
This section will give you a short introduction to the work with Video Capture.
1. Connect the end of your DV cable to the Cameo 600 DV.
2. Start your camcorder and set it to Player or VIR-mode. Next, connect the other end of the
DV cable to the camcorder. Your system will automatically detect, that your camcorder has
been connected to the computer.
3. Start "Video Capture 6.0 from the program folder „Ulead Media Studio Pro 6.0 VE“.
4. First, you must configure some settings in the "Configuration" menu:
Choose "Ulead DirectShow recording Plug-in" from the menu "Change recording
Plug-in..."
·
·
·
Select "Microsoft DV Camera and video recorder" from the menu "Ulead DirectShow
recording Plug-in.
Select "Device control MS 1394" from the menu "Device control".
5. Select "Preview" from the "View"-menu. Your camcorder should now be remote controlled
by the control buttons of "Video Capture, and the picture from your camcorder should be
displayed in "Video Capture”. If it doesn't support the remote control, you must use the
buttons of your camcorder.
Stop Record
Forward
Frame
End
forward
Frame
Play
Rewind
Frame back Start Frame
The Video Capture control section.
6. Now position your videotape to the point, from where you wish to start the recording and
click on the record button "REC" in the Video Capture control section.
VideoSystem Cameo 600 DV (English)
21
7. Now, the window "Cut Video" will open. Select "File" and enter a name for your video clip
to be saved on the hard disk drive. You may determine a path for your file, using the
"Browse" button. Be sure to have enough free memory, as each second of DV video
requires approximately 3,5 MB on your hard disk drive. To start the recording, click "OK".
