!
Safety note:
Disconnect the power cord from your computer´s power supply and
the electrical socket before opening the enclosure!
And now... step by step:
Shut down your computer and all connected peripheral components, like printer and
monitor. Ensure the power is switched off at the mains supply socket. Leave the power
cord connected first, so that your computer is earthed.
·
·
·
·
·
·
·
·
Touch the metal plate on the rear side of your computer to ground yourself and discharge
any static electricity. Remove the power cord.
Remove the cover of your computer.
Look for a free PCI expansion slot, remove the screw that holds the slot's bracket and
remove the bracket. To guarantee the best operation of your Cameo 600 DV, choose a slot
that is not next to a card already installed.
Unpack the Cameo 600 DV – PCI card carefully. Only touch the card's edges, while the
other hand should rest on the metal surface of your computer, ensuring that the
electrostatic discharge flows into the computer without damaging the card. Never touch
the components on the card´s surface.
Adjust the bracket of the Cameo 600 DV to the slot, so that the card's PCI connector
exactly fits to the socket of the slot.
Apply the card to the slot. You may have to use a little force to make sure that it is
connected correctly.
8
VideoSystem Cameo 600 DV (English)
Now attach the Cameo 600 DV with the screw of the PCI slot's bracket.
