User Manual
5
Procedure for connection:
Step 1:
Connect one end of the USB Type-C cord to the Type-C interface of the product, and connect the other end to
the USB interface of computer.
Step 2:
Please connect the product a power source by using the power adapter. The power adapter provides 12V DC;
Warning: do not use the non-original power adapter for this product. Otherwise, the product may malfunction
and the physical body may be damaged in an extreme case!
Step 3:
Press the power button to power on. When the power is connected, the product’s power indicator will turn
on.
Step 4:
If the hard disks work normally and the product powers on, the hard disk indicator will temporarily display
red, followed by Blinking green, and finally green lights. If the hard disk indicator displays red all the time, it
indicates that the hard disk is cannot be read. The hard disk may be damaged, inccompatible with the product.
If this occurs, please turn off the product and proceed to reinstall the same hard disk. If the hard disk indicator
still displays red, please replace the hard disk with a new one and try again.
Step 5:
After the product is connected to your computer, you might see a prompt asking you to format the product
or come across a message reading “The disk you inserted was not readable by this computer”. Please select
“Cancel” or “Ignore”, as the formatting of the product should occur only after you create a disk group.
6. Connection
Before use, power on the product and connect the data interface to your computer.
D5-300
