7
Assembly & Disassembly and Cleaning of Dust Bin:
Assembly & Disassembly of Dust Bin:
1. Extract the dust bin by
pressing the key on it.
(Refer to Figure 1 and
Figure 2)
2. Press the red button on it, and then the blower will
pop up automatically. (Refer to Figure 3)
3. Reverse the blower, release
2 fasteners and open the
cover. (Refer to Figure 4
and Figure 5)
4. Open the bracket and the filter will
appear. (Refer to Figure 6)
5. Change a new filter, press the semicircle
bracket by one hand to release the
fastener from the filter screen, and
remove the filter grid by the other hand and then change a
new one. (Refer to Figure 7)
6. Reverse the dust bin, tear out the mop, release the trailing
bar and then unplug the right and left fasteners on the
bottom of the dust bin (Refer to Figure 8 and Figure 9). All
parts should be assembled as before disassembly.
Figure 8 Figure 9
Don’t use the mop and trailing bar on the carpet or uneven ground.
Figure 1
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 2
