5
Warning, dangerous high
voltage! Please operate
with dry hands.
Installation of Docking Station and Charging for the Cleaner:
Automatic recharging:
1. Install the Docking Station on the flat ground firmly
and against the vertical wall(fixed on the wall with the
docking station sticker)
2. No obstacle or hollow areas 3m away from the
Docking Station in the front and 0.5m on the right and
left. (Refer to Figure 1)
3. The Cleaner cannot search the Docking Station for
charging if the infrared signal transmitting window of
the recharger is covered.
4. Connect the output terminal of the adaptor with DC
socket of the Docking Station. (Refer to Figure 2)
:
Please place the power cord of the adaptor along the
wall, or it may interfere with the brush or wheels.
Manual charging:
1. You can use the adaptor or Docking Station
of the Cleaner to charge for the main body
directly.
2. Connect the output terminal of the adaptor
with DC socket of the main body while using the
adapter for charging. (Refer to Figure 1)
Figure 1
3. Before charging, connect the adaptor with the
Docking Station , make sure the cleaner abut against
the Docking Station. (Refer to Figure
4.When you want to charge the machine, press the CHARGE
key on the remote control. The machine will find the Docking
Station in the valid scope and charge. (See Figure 3)
5. When the machine is searching for the Docking Station, if
you press the CHARGE key on the machine’s panel or
the “power “ key and CHARGE key on the remote
control, the machine will stop searching for the
Docking Station. (See Figure 4)
0.5m
0.5m
3m
Figure 1
Figure 2
High Voltage! Electrical
hazard! Please dry your
hands before using!
High Voltage! Electrical
hazard! Please dry your
hands before using!
Figure 2
High Voltage! Electrical hazard!
Please dry your hands before
using!
0.5m
0.5m
3m
Figure 1
High Voltage! Electrical
hazard! Please dry your
hands before using!
Figure
