FOR STEAM IRONING
High temperature steam ironing (cotton, linen)
Medium temperature steam ironing (wool, silk)
Low temperature ironing (synthetic fibres)
Fig.1
HOW TO FILL THE BOILER WITH WATER
•
Always make sure the plug is disconnected from the power
socket before performing this operation.
•
Unscrew the safety cap (2) by pushing it down and, simultaneously,
turning it counterclockwise SLOWLY!
•
Place funnel (17) as shown in figure 2
•
Slowly pour water into the boiler opening hole using the supplied
funnel (17).
•
Screw-in completely the cap (2) by pushing it down and rotating
it clockwise.
•
REFILL the boiler exclusively with drinking water. Never add
detergents, chemical additives or decalcifiers.
•
The maximum capacity of the boiler is 700 ml.
•
TIP: If the water in your area is particularly hard, every 3-4 fills,
fill one time with distilled water.
WARNING!
Never unscrew the boiler cap (2) while the appliance is working but switch it off and wait
for the appliance has completely cooled down before opening it.
TIP: while you’re using the appliance and the “Low water” (boiler empty) indicator light
ON, you can shorten the time to wait for open the cap (2) by following the “NO MORE
WATER DURING USE” instructions.
ENGLISH
INSTRUCTION FOR USE
OPERATING MODES
the appliance can not be operated in iron-only mode, the boiler and the iron are switched
ON and OFF at the same time.
If you want to use iron without steam, fill some water in the boiler (approx. 100cc, one
glass), rotate knob (6) all the way counterclockwise, and do not use the steam release
button (16 ).
After use, when the appliance has cooled down, empty the boiler.
CHOICE OF IRON TEMPERATURE
Depending on the type of fabric you wish to iron, adjust the iron temperature by rotating
the knob (13) to the position where chosen temperature is located at the indicator mark
(13a).
Fig. 2
