31
The
“TIME/OFF”
can not be less than
“TIME/ON”;
When the
“TIME/ON” is t
he same as
“TIME/OFF”, the time period enter into standby
mode;
Note: If main switch off, power cut off, or plug out, it need reset. You can press to
check you set Time /Day.
SET OPEN-WINDOW DETECTION (ONLY BY REMOTE CONTROL)
1)
Press
“ ”
，
the product enter into working status. Heating for a moment untill
stable.
2)
2).Press
“ ”
by remote control,light “
/ ° C will on; The temperature display
“23”
by default. Press
“
/
”
to set target temperature. During open-window
detection mode, once the ambient temperature drops 5-10° C within 10 minutes, then
the product will stop working within 30 minutes and enter into standby mode. Then
press “
”
to turn on the product.
3)
Press
“
”
again to turn off the open-window detection, the lig
ht “
”will go off
and the product will resume to previous working mode.
4)
Below is an example ( F ) to set 23° C during open-window detection
5)
When turn on at the same time for both open-window detection and weekly program,
during the OFF period of weekly
program, the product doesn’t work. During the
working status of weekly program, the temperature is subject to the setting
temperature of open-window detection. Below is a example (G):
F G
RECEIVER
RECEIVER
