29
Note: Above setting Time/Day will keep as long as switch on or stand by. If main
switch off or power cut off, or plug out, it need reset. You can press to check
you set current Time / Day.
2.
Set temperature
During working status, Press
“ /
”
,the display shows
“
23
”
as default.
Press
“ /
”
to set desired temperature (temperature range 10-49° C
), press”
“ to confirm the setting.
For example: The current ambient temperature is 15° C, when set temperature to 25° C, the
display shows as below:
Note:
When setting temperature, it will use SMART working way:
1)
Setting temperature
–
ambient temperature>2° C, working with high power;
2)
0° C <Setting temperature
–
ambient temperature=<2° C, working with low power;
3)
Setting temperature
–
ambient temperature=0° C, the cool fan will work for 30seconds
to below out the heating left inside, then fan stop, the unit enter into standby mode.
after enter into standby mode, if the machine cool down and:
4)
Setting temperature
–
ambient temperature>=2° C, the machine will wake up and
resume to heating.
If you want to cancel the setting temperature, press
“ ”
key to choose the heating I or II,
the product will work without setting temperature. While the display
“ ”
will go off, and
will show “
--
”. After continuous heating for 12hours, the cool fan will work for 30seconds
and enter into standby mode.
RECEIVER
C
“
