Termozeta Milord 8000, Инструкция по эксплуатации

Страница: 15 / 20

To enable this function, press the super-steam button (4) several times: the iron will
supply an instantaneous high power steam shot.
• Do not press button (4) repeatedly too fast as this may cause some water droplets to
be ejected together with steam.
• Use this function only with the temperature control knob (12) set to symbols , max.
• When the super-steam function is used for the first time some limestone pieces could
come out. We therefore recommend not to discharge the first steam jets directly onto
the linen.
This system prevents the iron from dripping onto the linen. The device is automatically
enabled if, for whatever reason, the temperature of the soleplate lowers.
To “liven up” the clothes hung on cloth hangers, curtains, etc. you can use the iron
vertically:
• Set the temperature control knob (12) to the max position.
• Hold the iron in a vertical position at a distance of about 15-20 cm from the fabric.
• Press the super-steam button (4) several times.
NOTE
• Do not press the super-steam button too many times consecutively. Observe pauses
of some seconds between one operation and the following one.
IMPORTANT
• Do not use this function on fabrics made up of synthetic fibres.
• Keep an adequate distance between the fabric and the iron soleplate in order to avoid
burns.
• Use this function only on clothes hung on clothes hangers. Do not try to iron
clothes if they are worn by a person: the steam is very hot, you could cause
serious burns injuries.
SUPER-STEAM FUNCTION
ANTI-DRIP SYSTEM
VERTICAL IRONING
SPRAY FUNCTION
• This function allows moistening the linen during both steam and dry ironing.
• To enable it press the spray button (5) several times and direct the water jet onto the
most resistant creases.
ENGLISH