Termozeta Hair style 2000, Инструкция по эксплуатации

Страница: 14 / 16

ENGLISH
14
• Leave the plates to cool down completely when finished, before putting the
appliance away.
We recommend making some hair straightening tests starting from a low
temperature to gradually reach a higher temperature.
•For coarse, curly or hard-to-straighten hair select a medium (180-200°C) to high
setting (210°C).
•For fine, medium-textured or softly waved hair select a medium (150-170°C) to
low setting (120-140°C).
3 – USE
Important!
Some steam could be produced while straightening hair; this is only an
excessive hair wetness.
During the straightening phase, lean the appliance on heat-resistant
surfaces. The heating parts of the appliance reach a high working
temperature, which is essential to obtain a good result. For this reason the
heating parts must not come into contact with the power cord and with
surfaces that are not heat-resistant (plastic, wood, paper, etc.) and they
must not be positioned near flammable substances.
• Completely unroll the power cord (9) and connect the plug to a suitable current
socket.
• Press the ON/OFF button (6) in order to switch the appliance on.
When the
appliance is switched on, temperature is always settled at 180°C.
• Set the desired temperature by pressing the push buttons (4) (+) and (5) (-) so
as to increase or decrease the appliance heating temperature by 10°C at a time
(minimum temperature 120°C, maximum temperature 210°C). The display shows
the instantaneous value of the plate temperature and a segmented scale.
Temperature
value
Segments
Temperature
value
Segments
120°C ▌ 170°C ▌▌▌
130°C ▌ 180°C ▌▌▌▌
140°C ▌▌ 190°C ▌▌▌▌
150°C ▌▌ 200°C ▌▌▌▌▌
160°C ▌▌▌ 210°C ▌▌▌▌▌
• During the heating phase, lighted segments flash. Once the selected temperature
has been reached, segments remain steady on.