- 17 -
HEATING EFFECT
Select “HEATING” function (“Heating effect”). Select your desired temperature: the settable
temperature range is between 15°C and 25°C.
Note: After starting the Unit, or after switching over from a mode to another mode, the fan operates, but compressor
Further information are available in the Chapter “Troubleshooting”.
HEATING EFFFECT IN OUTDOOR OPERATION
The Unit is ourside the room to be heated.
Outdoor operation is ideal for the transition period in which outside temperatures do not fall below
7°C (if the outside temperature should however fall below 7°C continuously, we recommend
indoor operation).
Connect the air hose and the air outlet grid to the Unit as displayed in the illustration; the air
hose connection piece and air outlet grid need to be exchanged according to the position of the
Unit (indoor operation or outdoor operation).
For heating in indoor operation, the position of air hose and air outlet grid is shown in the
following Figures:
Select “HEATING” function (“Heating effect”). Select your desired temperature: the settable
temperature range is between 15°C and 25°C.
The air with high oxygen content heated by the Unit is fed into the room through the air hose.
This can be executed e.g. by a tilted window, a door or wall aperture. Make sure that no cold
outside air can enter the room.
Note: After starting the Unit, or after switching over from a mode to another mode, the fan operates, but compressor
Further information are available in the Chapter “Troubleshooting”.