Termal Kamin 20, Руководство по обслуживанию

Страница: 9 / 99

Service manual
9
They have the function of removing heat from the warm surfaces of the stove and using the directional
air to pass it over to the room. Its work can define a control unit in a way that automatically increases
the speed of rotation in relation to the achieved temperature of the stove or that the user sets the fixed
speed of rotation.
The service technician must pay attention and check that the ventilation direction of the fan, after
installation and connection, is correct!
2.2.3 Dispenser-auger assembly
The dispenser assembly is characterized by the step of the spiral of the dispenser and the engine rpm
speed (rounds per minute speed). Its function is transporting pellets from the tank to the burner where
the combustion will take place. The amount of dosage pellet depends on the working time of the
dispenser engine which is spiraled. The required quantity of pellets that is inserted into the burner is
determined by the time of operation of the dispenser engine, i.e. it is in function from time (the control
unit is operated during the operation of the engine of the dispenser) and therefore it must be ensured
that
the spiral and the dosing motor are compatible with the current parameters of the boiler
operating mode .
For larger boilers, when a larger amount of pellets are required to burn, two dozen spiral circuits and two
motors are produced.
The servicer should pay attention to the type and speed of the engine, and
adjust the boiler operating parameters accordingly!