Termal Kamin 20, Руководство по обслуживанию

Страница: 22 / 99

Service manual
22
For example, we want to program the boiler with the program according to the list of programmers 02.
We connect the programmer, blink our first tag ... .to
UP we select the folder 02. Press the ENTER button
to select this folder, blink the second mark 01. Always 01 is the first file of the program we need Select
any folder. Then, with the ENTER key again, we select the file.
When we have finished selecting the program, the Load indicator will appear on the display of the
programmer and the LED above the CONT will be active.
Confirm again with ENTER will appear loading display (tag in the form of vertical bars). This indicates that
the program is loaded into the control unit. After filling in the display (two lines of dashes), the PASS tag
appears. Again, confirm with ENTER, on the display will write Load which is the end of one program load
process. We turn off the programmer, we return the boiler display connector to the original location on
the control unit and thus we have finished the boiler programming.