TermaCook IKT 905 O4 FS G5, Инструкции по монтажу и использованию

Страница: 31 / 64

Operation GB
31
4.14 Stop function
The cooking process can be brie fl y interrupted with the
STOP function, e.g. if the doorbell rings. The STOP func-
tion must be released in order to continue cooking at the
same power level. If a timer has been set it will pause and
will then continue.
This function is only available for 10 minutes for reasons of
safety. The hob will then be switched o
ff .
1. Pots and pans are on the cooking zones and the requi-
red power levels have been set.
2. Press the Stop key . Instead of the selected power
settings, the interval sign will light up.
3. The interruption is ended by fi rstly pressing the STOP
key and then the fl ashing sensor fi eld left of
the STOP key .
When operating the sensor fi eld slide over the comple-
te sensor fi eld.
The second key must be pressed within 10 seconds,
otherwise the stop function will be maintained.
4.15 Recall function
(recovery function)
The most recent setting can be recovered if the hob is
switched o
ff unintentionally.
The recall function only works if at least one cooking zone
is switched on.
1. The hob is inadvertently turned o ff by the ON/OFF key
of the hob .
2. Within 6 seconds after turning it o ff , press the ON/OFF
key of the hob again. The stop key LED will blink.
The STOP key must be pressed immediately after-
wards.
The original cooking levels are restored. The cooking
process continues.
What can be restored:
• Cooking levels of all cooking zones
• Minutes and seconds of programmed timer functions
• Automatic boost function
• Power
boost
Not to be restored:
• Operation time limit (it is counted from 0)