User Manual — Electric heating elements of the SKT series
52
TROUBLESHOOTING
Device is connected to
electricity, no diodes are
on, heating element
does not heat
Device is not turned on
Turn the device on with
the
button
q
Heating element does
not heat, both diodes are
flashing alternately
Possible incorrect
installation of controller
on the heating element
Check if the controller
has been correctly
connected with the
heating element (casing
of the controller should
completely cover the
head of the heating
element)
Possible electronics
damage
Disconnect the device
completely from
electricity and wait until it
cools down, then turn it
back on again
Problem with connection
or power supply
Check the connection of
the power supply wire.
Check if the voltage is
correct
Device heats although it
has been turned off the
button
q
In any other situations, disconnect the device from electricity, wait for the
radiator to cool down and turn it back on again.
If the problem persists, please
contact your local Distributor.
Problem
Possible cause
Problem solution
Содержание SKT 1
