INSTALLATION
TRK-SR2 P
ARTS
Figure 8. Verify that your TRK-SR2 package includes the above items.
R
ECOMMENDED
T
OOLS
A
ND
S
UPPLIES
Although not necessary, the following tools and supplies may aid in installation:
•
Any tool to help cable routing (e.g., flat dental pick, screwdriver, etc.)
•
Lubricant (e.g., light machine oil to aid cable routing through old molding)
•
Cable tie wraps and adhesive mounting bases (to manage cable routing)
•
Tape measure and level (for positioning the antenna)
I
NSTALLATION
P
RECAUTIONS
A
ND
T
IPS
•
When selecting an antenna location for the TRK-SR2, make sure the
proposed site meets the following conditions:
a. The selected site must have a conductive surface area (e.g., metal or
aluminum roof) of at least 2-1⁄4 square feet and be 6 inches from
rear window molding.
b. Line of sight to satellites must not blocked by any metal obstructions
(e.g., crossbars from a roof rack).
c. Choose the highest possible location on the vehicle’s roof that satisfies
the above conditions and is as flat as possible.
•
Although a center position on a roof is the most aesthetically pleasing, if
there is an obstruction (e.g., skid ribs, protruding brake light on roof line,
etc.) consider offsetting the TRK-SR2 from the center. If this doesn’t work,
use the Terk TRK-SR1 Glass-Mount Satellite Radio Antenna instead.
6
Installation
(1) Roof-Mount Antenna
(with self-adhesive backs)
Cable Cover
Flap
(1) 11' Pair of
Coaxial Cables
(attached to antenna module)
(1) Cleaning
Towelette
TRK-SR2 Install Guide 8/29/01 10:22 AM Page 6
