Teridian 73S8009C, Руководство пользователя

Страница: 6 / 21

73S8009C Demo Board User Manual UM_8009C_059
6 Rev. 1.3
1.3 Recommended Operating Conditions and Absolute Maximum Ratings
Table 1: Recommended Operating Conditions
Parameter Rating
Supply Voltage V
PC
2.7 to 6.5 VDC
Supply Voltage V
BUS
4.4 to 5.5 VDC
Supply Voltage V
BAT
4.0 to 6.5 °C
Ambient Operating Temperature -40 °C to +85 °C
Table 2: Absolute Maximum Ratings
Parameter Rating
Supply Voltage V
BUS
-0.5 to 6.6 VDC
Supply Voltage V
BAT
-0.5 to 6.6 VDC
Supply Voltage V
PC
-0.5 to 6.6 VDC
Input Voltage for Digital Inputs -0.3 to (V
DD
+0.5) VDC
Storage Temperature -60 to 150 °C
Pin Voltage (except card interface) -0.3 to (V
DD
+0.5) VDC
Pin Voltage (card interface) -0.3 to (V
CC
+0.3) VDC
Pin Voltage, LIN pin 0.3 to 6.5 VDC
ESD Tolerance – Card interface pins ± 6 kV
ESD Tolerance – Other pins ± 2 kV
Pin Current ± 200 mA
Operation outside these rating limits may cause permanent damage to the device.
ESD testing on Card pins is HBM condition, 3 pulses, each polarity referenced to ground.
1.4 Notes When Using a 73S12xxF Evaluation Board
The 73S12xxF Evaluation Board has two power supplies; 3.3 V and 5.0 V. Normally, the 5.0 V supply is
tied to VPC IN on the 73S8009C board. The 73S8009C can supply the 3.3 V to the remainder of the
system by configuring the jumpers accordingly. The 73S8009C VDD output can be disconnected from
the rest of the evaluation board if desired and the 3.3 V supply on the 73S12xxF Evaluation Board can be
used. See the jumper descriptions for more details.