Terex tc37 Скачать руководство пользователя страница 48

Страница: 48 / 100

Operating Manual Crawler Excavator TC37

Operation

4.7

Driving and steering

Driving

– Rocker pedal / hand lever (20/6) for right-hand

crawler chain:

– Rocker pedal / hand lever (20/5) for left-hand

crawler chain:

Driving forward or reverse

• Move the rocker pedal / hand lever on the right

(20/6) and the left (20/5) equally forward or back-
ward.

Cornering

• Reduce the speed of one crawler chain according

to the curve.

Spot-turning

• Operate the rocker pedal / hand lever for the right

and left-hand crawler chains in an opposed
manner.

Turning over one crawler chain

• Operate the rocker pedal / hand lever for the right

or left-hand crawler chain.

Fig. 20

Driving and steering

HR3.7-03-17

4/4

Danger to life

due to incorrect operation.

• Always observe that the direction of travel

always relates to the undercarriage (drive
at the rear, dozer blade in front)

Attention

The engine must be switched off before lifting
the exit barrier (20/2) and leaving the
machine.

A) forward

B) reverse

C) forward

D) reverse

Содержание tc37





































































































Результаты поиска

Содержание tc37

Отзывы:

Похожие инструкции для tc37

Бренды по названию

Популярные бренды

Terex tc37, Руководство по эксплуатации

Результаты поиска

Содержание tc37

Отзывы:

Похожие инструкции для tc37

Бренды по названию

Популярные бренды