manualshive.com logo in svg

Terex T300-1, Руководство оператора

Поделиться
Скачать
Terex T300-1 Скачать руководство пользователя страница 55

Access/Egress

Access/Egress Safety

Access and egress from the crane operator's cab must always be accomplished using a three-
point system. Either two-feet and a hand or two hands and a foot should be in contact with
the crane while moving from the ground into the operator's cab or moving from the
operator's cab to the ground.

To provide safe access and egress to/from the crane, Terex provides a number of steps,
ladders and handrails allowing three--point access to all areas of the crane where it is
necessary for the operator to be when moving from the ground to the operator's cab or
from the operator's cab to the ground.

Access/egress to/from areas of the crane not accessible through the provided
three-point access devices should only be attempted using approved access
devices (ladders, lifting platforms, etc) providing three- point access capability.

Crane Cab Access / Egress

T300-1_T500-1_T780

Safety

54

P/N 12261-683 REVISED: January 2015

Содержание T300-1

















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды