Terex Genie S-40 HF Скачать руководство пользователя

Страница: 36 / 90

Operator's Manual

First Edition • Third Printing

Controls

-40/45 XC

™

• S

-40/45

HF • S

-40/45 TRAX

™

Part No. 1274724GT

11 Raise/retract boom indicator light

Raise/retract the boom until the light is off.

12 Lower boom indicator light

Lower the boom until the light is off.

13 Generator indicator light

Light on indicates the generator is in use.

14 Generator switch (if equipped)

Move the generator switch up to activate the

generator. Move the switch down to turn off

the generator.

15 Aircraft protection override switch (if equipped)

Move and hold the aircraft protection override

switch to operate the machine when the

platform bumper is against an object.

16 Red Emergency Stop button

Push in the red Emergency Stop button to the

off position to stop all functions and turn the

engine off. Pull out the red Emergency Stop

button to the on position to operate the

machine.

17 Dual axis proportional control handle for drive

and steer functions.

Proportional control handle for drive function

and thumb rocker for steer function.
Move the control handle in the direction

indicated by the blue arrow on the control

panel and the machine will drive forward.

Move the control handle in the direction

indicated by the yellow arrow and the machine

will drive backwards. Move the control handle

in the direction indicated by the blue triangle

and the machine will steer to the left. Move the

control handle in the direction indicated by the

yellow triangle and the machine will steer to

the right.

Move the control handle in the direction

indicated by the blue arrow on the control

panel and the machine will drive forward.

Move the control handle in the direction

indicated by the yellow arrow and the machine

will drive backwards. Press the left side of the

thumb rocker and the machine will steer to the

left. Press the right side of the thumb rocker

and the machine will steer to the right.

18 Drive enable indicator light

Light flashing indicates that the boom has

moved just past either non-steer wheel and

drive function has been interrupted.

Содержание Genie S-40 HF



























































































Результаты поиска

Содержание Genie S-40 HF

Отзывы:

Похожие инструкции для Genie S-40 HF

Бренды по названию

Популярные бренды

Terex Genie S-40 HF, Руководство оператора

Результаты поиска

Содержание Genie S-40 HF

Отзывы:

Похожие инструкции для Genie S-40 HF

Бренды по названию

Популярные бренды