Terex Genie Lift Tools GS-2669, Дополнение к руководству оператора

Страница: 6 / 17

Operator's Manual Supplement
First Edition • Third Printing
Installation Instructions
6 Lift Tools
™
Material Carrier Part No. 1288240GT
Note: Perform this procedure on a firm, level
surface with the machine in the stowed position.
Note: Refer to the illustrations for the material
carrier mounting locations.
Note: The material carrier mounted to the
railing of the extension deck must be located
within the perimeter of the main deck whether
the platform extension deck is retracted or
extended.
Note: Ensure the location of the Material
Carrier with load does not interfere with
entering or exiting through the platform gate.
Tip over hazard. Failure to
mount the material carrier as
instructed, could result in the
machine tipping over, causing
death or serious injury.
1 Mount the rail attachments to the platform
using U-bolts and nylock flange nuts. Hand
tighten. Genie part number 1288658GT,
131681GT, 1274322GT.
Note: Remove and discard the hex nuts and flat
washers supplied with the U-bolts.
2 Insert the material carrier post assemblies into
the rail attachments. Genie part number
1289762GT.
Note: The ratchet straps must be located towards
the center of the machine.
3 Secure the base weldment to the post using
the provided retaining fasteners. Torque to
31 ft-lbs / 42 Nm. Genie part number
1288629GT, 1256850GT, 1274172GT.
main deck extension deck
4 Secure the material carrier to the extension
deck railing. Torque to 31 ft-lbs / 42 Nm.
5 Align the material carriers and tighten the
U-bolts. Torque to 31 ft-lbs / 42 Nm.
6 Insert the supplement Operator's Manual into
the manual storage box located in the
platform.