Terex Genie Genie Lift, Руководство оператора

Страница: 27 / 38

Second Edition • First Printing Operator's Manual
Operating Instructions
Part No. 1314200GT Genie Lift
™
25
Setup
Select an area that is firm, level and free of
obstructions.
Follow the Setup procedures in the Function Tests
section.
Raising and Lowering Load - Manual
Winch
1 Center the load on the forks or load platform.
2 Raise the load by firmly grasping the winch
handle and rotating it clockwise. Do not allow
the cable to wind unevenly onto the winch
drum.
3 Lower the load by firmly grasping the winch
handle and rotating it counterclockwise. After
lowering to the desired position, turn the winch
handle clockwise (raise the load) 1/4 turn to
set the brake.
Moving Machine with a Load
It is best to move the machine on the work site
with no load. Moving a raised load should be
restricted to positioning for loading and unloading.
If it is necessary to move the machine with a
raised load, understand and obey the following
safety rules:

Make sure the area is level and clear of
obstructions.

Make sure the load is centered on the forks
or load platform.

Avoid sudden starts and stops.

Travel with the load in the lowest possible
position.

Keep personnel away from the machine and
load.

Do not tilt the machine back with a raised
load.