Terex Genie Genie Lift, Руководство оператора

Страница: 31 / 38

Second Edition • First Printing Operator's Manual
Load Capacity Charts
Part No. 1314200GT Genie Lift
™
29
Load Capacity Charts
Observe and Obey:

Failure to properly position the load may result
in death or serious injury.

Verify that the load you wish to raise does not
exceed the maximum load for your load
center. See the load capacity charts on the
next page.
Tip-over hazard. Raising a load
that exceeds the machine
capacity may result in death or
serious injury.

A load center is defined as the balancing point
(center of gravity) of a load and must be
positioned within the load center zone.
Tip-over hazard. Failure to
position the load center within
the load center zone may result
in death or serious injury.
Forks
Load Positioning Instructions
1 Determine the weight of the load and the
location of its load center.
2 Measure to the load center from the side of the
load that will be closest to the carriage.
3 Refer to the chart on the next page to
determine if the machine is capable of lifting
the weight at the location on the forks.
4 Place the load so that it rests on the forks, as
close to the carriage as possible.
5 Position the load so that the load center is
within the load center zone.
mea
su
re t
o t
he load c
ente
r
1. Load Center Zone