6
7
conductor speaker wire has printing on one side to help you differentiate
between the wire pairs. The 4 pictures show how to make banana connections
as follows:
Banana Plugs Connection
Bare Wire Connection
Using Bare Wire
1). Use your thumb and finger to unscrew the binding post connectors on the
back of each speaker.
2). Insert each speaker wire into the holes on the side of the binding post
connectors, observing proper polarity.
3). Retighten the binding posts with your fingers.
4). The stripped portion of the wire should be secured firmly in each connector.
5). Make sure that none of the speaker wire strands have come in contact with
an adjoining terminal.
6). Repeat steps 1 and 5 to connect speaker wires to the amplifier.
position before connecting the power supply.
Connect the cable with the round end from the power supply to the rear
panel power connector. Connect the AC power cable from the power
supply to a power outlet and verify that the indicator light on the power
supply is illuminated. We recommend using a high-quality surge suppressor
and/or AC line later on all electronics equipment.
Step 3
–
Connecting Audio Sources
Using the appropriate audio cable (AUX cable),
connect your audio source (computer, iPod, etc.) to amplifier audio inputs.
If you want to connect the amplifier to the audio source via Bluetooth, you
can pair them when the amplifier is turned on. TERAUDIO Bluetooth
amplifiers can connect to only one device at one time, The Bluetooth name
is TERAUDIO, when the Bluetooth is paired, the LED light on the front panel
will turn to blue from red.
NOTE
: Some TERAUDIO Bluetooth amplifier have the " BT " and " AUX "
selector(BT20C, BT30A..), you can choose the input way when you connect
the audio source. Some amps don't have the selectors ( TS-BT10A), so once
the Bluetooth connects, the RCA input will interrupt, so if you want to
connects the amplifier with RCA input, you need interrupt the Bluetooth
connects from your Bluetooth device.
Step 4
–
Operation
Turn on the TS-BT10A volume/power knob and set the volume control to
an initial set of about 12 o’clock. Turn on your audio input source and
adjust the volume to your desired listening level.
Step 2
–
Connecting the Power Supply
Be sure that the volume/power switch on the front panel is in the OFF
