Terasic VEEK-MT2 Скачать руководство пользователя страница 41

Страница: 41 / 58

VEEK-MT2 User Manual

www.terasic.com
July 4, 2016

4.7

Video and Image Processing for Camera

The Video and Image Processing (VIP) for Camera Example Design demonstrates dynamic scaling and

clipping of a standard definition video stream in RGB format and picture-in-picture mixing with a

background layer. The video stream is output in high resolution (800×480) on LCD touch panel.

The example design demonstrates a framework for rapid development of video and image processing

systems using the parameterizable MegaCore® functions that are available in the Video and Image

Processing Suite. Available functions are listed in

Table 4-1

. This demonstration needs the Quartus II

license file includes the VIP suite feature.

These functions allow you to fully integrate common video functions with video interfaces, processors,

and external memory controllers. The example design uses an Altera Cyclone® IV E EP4CE115F29

featured on the VEEK-MT2.

A video source is input through the CMOS sensor on VEEK-MT2 which generates a digital output in

RGB format. A number of common video functions are performed on this input stream in the FPGA.

These functions include clipping, chroma resampling, motion adaptive deinterlacing, color space

conversion, picture-in-picture mixing, and polyphase scaling.

The input and output video interfaces on the VEEK-MT2 are configured and initialized by software

running on a Nios® II processor. Nios II software demonstrates how to control the clocked video input,

clocked video output, and mixer functions at run-time is also provided. The video system is

implemented using the QSYS system level design tool. This abstracted design tool provides an easy

path to system integration of the video processing data path with a NTSC or PAL video input, VGA

output, Nios II processor for configuration and control. The Video and Image Processing Suite

MegaCore functions have common open Avalon-ST data interfaces and Avalon Memory-Mapped

(Avalon-MM) control interfaces to facilitate connection of a chain of video functions and video system

modeling. In addition, video data is transmitted between the Video and Image Processing Suite functions

using the Avalon-ST Video protocol, which facilitates building run-time controllable systems and error

recovery.

For the objective of a better visual effect, the CMOS sensor is configured with autofocus function. The

autofocus function works at first when the demonstration starting up.

Содержание VEEK-MT2



























































Результаты поиска

Содержание VEEK-MT2

Отзывы:

Похожие инструкции для VEEK-MT2

Бренды по названию

Популярные бренды

Terasic VEEK-MT2, Руководство пользователя

Результаты поиска

Содержание VEEK-MT2

Отзывы:

Похожие инструкции для VEEK-MT2

Бренды по названию

Популярные бренды