Terasic HAN Pilot Platform, Руководство по демонстрации

Страница: 11 / 117

HAN Pilot Platform
Demonstration Manual 10 www.terasic.com
September 6, 2019
Figure 2-8 MPU-9250 Demo
10. For programmable PLL TXCA test, please input key ‘3’ and press ‘Enter’ in the nios-terminal
first, then select the desired output frequency of HDMI/SFP+ REFCLK, as shown in
Figure
2-9 .
Figure 2-9 TXCA Demo
11.
For programmable PLL TXCB test, please input key ‘4’ and press ‘Enter’ in the nios-terminal
first, then select the desired output frequency of DP/USB/FMC REFCLK, as shown in
Figure