7-15
(8) High temperature alarm detection setting
: High temperature alarm detection
Function
Seletcts whether or not to detect a high temperature alarm.
Adjustable
range
0: No detection
1: Detection
Initial setting
1: Detection (If you specify the other value upon placing an order, the
specified value is preset in the parameter.)
Remarks
Use the water supply unit by selecting “Detection” for this setting, except
when alarm signals need to be kept undetected until a damaged high
temperature sensor is replaced.
(9) Starting frequency failure alarm detection setting
: Starting frequency failure alarm detection
Function
Seletcts whether or not to detect a start-frequency failure alarm.
Adjustable
range
0: No detection
1: Detection
Initial setting
1: Detection (If you specify the other value upon placing an order, the
specified value is preset in the parameter.)
Remarks -
(10) Water level alarm reset setting
: Water level alarm reset setting
Function
Seletcts the method to reset the water level alarms (Receiver tank full,
Receiver tank low, and Dry-run prevention): Manual reset by using the
reset switch or Automatic reset by the recovery of water level.
Adjustable
range
0: Manual reset
1: Automatic reset
Initial setting
0: Manual reset
(If you specify the other value upon placing an order, the specified value
is preset in the parameter.)
Remarks
If Automatic reset is selected, the water level alarm is automatically
canceled when the water level is recovered. In such a case, the
generated alarms can be checked in the alarm log.
