A S T 3 9 8 8 0 ( 0 8 0 7 )
1 7 o f 3 0
6.2 Control Unit/Module Update in Pass-thru Mode
NOTE:
•
These instructions are a summary of the updating process.
•
For a description of the GNA600 Kit parts used in this procedure, refer to section 3.3.
•
For a description of the GNA600 LED patterns, see section 7.3.
1. Connect the USB PC Interface Cable to the
i
N Workstation and to the GNA600. From the
Updating Honda Control Modules
main screen, select
Pass-thru Mode.
2. Connect the DLC Cable to the GNA600 and to the vehicle’s DLC. (You don’t need to turn
the ignition switch to ON (II) before connecting the GNA600.)
3. Turn the ignition switch to ON (II), and wait until the green #2 LED on the GNA600 stays on.
Click on the
Check Mark
to continue.
