8
Making the Connection – Direct to Host
If the PCoIP Remote Workstation Card IP address is known (see KB 15134-
1348 for details) or its default IP address is used, you can choose
Direct
to Host
as the session connection type to ensure the PCoIP Zero Client
connects directly to the specified workstation card.
1. From the zero client OSD, click
Options > Configuration > Session.
2. Click
Unlock
, enter the requested credentials, and then click
OK
.
3. Change the connection type to
Direct to Host
.
4. Enter the workstation card’s IP address in the
DNS Name
or IP Address
field.
5. Click
OK
.
6. Click
Reset
.
7. When the Connect button appears, click
Connect
.
3. Click
Connect
.
The SLP discovery process starts, and the message “Discovering
hosts, please wait…” displays. When discovery completes, the IP
and MAC addresses of any discovered workstation cards are listed on
the screen.
4. Locate your new card by its MAC address and then select it.
5. Click
Connect
.
Once connected, the display shows the host PC screen. The
zero client’s session LED on the front panel turns green, indicating
a successful PCoIP connection.
ESTABLISHING A PCOIP CONNECTION
(Continued)
