5
POWER AND CONNECT
1. To power VidiU Go, connect the USB-C A/C
adapter to the USB-C port (Fig. 2-1) located on
the back of the device, then press the power
button. VidiU Go begins to boot as soon as the
power is activated.
2. Turn on your video source then connect it to
VidiU Go using either the HDMI or SDI input
(Fig. 2-2).
3. Use a hot shoe mount and a 1/4”-20 screw to
mount VidiU Go to your camera, tripod mount, or
other accessory mount, if desired.
4. Once VidiU Go has booted, verify that the
Video status indicator is illuminated (Fig. 2-3). This
indicates a video source has been successfully
detected and the encoder is running.
Fig. 2-1
Fig. 2-2
Fig. 2-3
GETTING STARTED
1. Power your device
2. Connect VidiU Go to a network
3. Choose your streaming platform
There are three key steps to going live with VidiU Go
:
M: Ethernet port
N: Mic/Line stereo input
O: USB-C power input
P: 1/8” headphone output
Q: Thumb screws
R: SMA antennas
