Teradek CTRL.3, Быстрый старт

Страница: 5 / 17

POWER AND CONNECT
1
3
2
4
5
Connect power to the receiver’s PWR port.
Connect the motor(s) to the receiver using a 4-pin connector. If connecting two or
more motors, use a 4-pin to 4-pin connector to daisy-chain them together. The
motor(s) will then begin calibrating.
Attach the motor(s) to the rods/lens.
Insert an LP-E6 battery in the controller, then press the REC/PWR (C) button to
turn on the controller.
Use one of two methods to pair your controller with the receiver (see page 4).
3