Teradek CTRL.3, Быстрый старт

Страница: 6 / 17

If the controller has not been paired to a receiver, you can use one of the following
two methods to pair both devices.
PAIR CONTROLLER AND RECEIVER
WIRELESS PAIRING
4
WIRED PAIRING
Press the MENU button on the controller, then navigate to WIRELESS>FIND RECV to
scan for active receivers and automatically pair. The LED on the controller will turn
green once paired.
Connect a 5-pin connector from the controller’s wired-mode input to the IN-1 input on
the receiver. The controller and receiver will remain paired even after disconnecting the
5-pin connector. The LEDs on the controller and receiver will turn blue once paired.