DEC-200™ H.264 and MPEG-2 Decoder
User Guide V2.7
9
2. General Information
You can operate the DEC-200™ blades in the FR-110 single blade chassis, in the FR-210 dual blade
chassis or in the FR-2000 multi-channel rack chassis. For example when only a small amount of
decoders is required, or if single channel decoders need to be set up at dispersed network locations.
All equipment (like the chassis) and DEC-200™ accessories are handled as model options and need
to be purchased separately.
2.1
Unpacking the Decoder
When you unpack the ordered equipment, please make sure that all the equipment is complete.
Normally the DEC-200™ blades are pre-fit into the according chassis that the decoders have been
ordered with.
If DEC-200™ blades are ordered and shipped separately, please be careful when handling the blades.
Be sure to avoid electrostatic influence when touching the blades.
After unpacking, your DEC-200™ should include the following:
1 x Teracue DVD which includes this user guide
1 x DEC-200™ H.264/MPEG-2 Decoder blade
1 x Breakout cable ‘S’
2.2
Setting up the Decoder and Safety Instructions
Always read the instructions carefully and keep this user guide for future reference.
Please choose a suitable location for operating the decoder(s).
The DEC-200™ should not be exposed to the following:
Moist and dusty environments.
Air humidity above 80%.
Avoid extreme vibrations or shocks.
Direct sunlight and extreme heat.
Temperatures below 0°C and above +65°C.
Avoid quick and dramatic temperature changes.
.!.
Please set up the decoder on a reliable and flat surface when using the FR-110/FR-210
chassis or mount in a rack, when using the FR-2000 chassis.