Teracue DEC-200 Скачать руководство пользователя страница 56 | Manualshive

Страница: 56 / 62

Teracue DEC-200 Скачать руководство пользователя страница 56

DEC-200™ H.264 and MPEG-2 Decoder

User Guide V2.7

56

4.5

Output Signal Switching of the BNC Connector on the
Front Panel

You have the possibility to change the signal type (Composite or SDI) for the video output at the BNC
connector  on  the  front  panel.  The  COMP/SDI  switching  feature  at  the  BNC  connector  on  the  front
panel  is  only  available  for  DEC-200™  Hardware  Revision  2  blades.  Furthermore  this  feature  is
implemented since the DEC-200™ firmware version 1.29.10.

To switch  the signal type (Composite or  SDI) for the  video output at the BNC connector on the front
panel, you must put a mini-jumper to another pin position. Furthermore for Composite output you must
change  the video  signal  output parameter  on the DEC-200™  webpage,  please  see chapter  3.4.3  on
page 20. If you want to have a SDI output on the BNC connector, you must only put the mini-jumper
on the right position without changing any setting in the DEC-200™ webpage.

If you hold the decoder with the video output pointing to the left, you can locate the mini-jumper at the
top left corner of the blade, see Figure 39.

Figure 39: Mini-Jumper location for signal type switching at the BNC front panel output

«
...
54
55
56
57
58
...
»

Содержание DEC-200































































Отзывы:

Нет отзывов