Teracom TCW280, Руководство пользователя

Страница: 20 / 34

TCW280_R1.2 – February 2019 Page 20
setup -> outputs -> anOutSetup -> anOut2Setup
OID Name Access Description Syntax
x.2.2.2.1.2.1.0 anOut2description read-write Analog out 2 description DisplayString
x.2.2.2.1.2.2.0 anOut2mode read-write Analog out 2 mode
Integer {
voltage(0),current(1)}
x.2.2.2.1.2.3.0 anOut2range read-write Analog out 2 range
Integer {
volt0to5(0),volt0to10(1),
ma4to20(5),
ma0to20(6),
ma0to24(7)}
x.2.2.2.1.2.4.0 anOut2restvalue read-write Analog out 2 restart value
Integer {
lastValue(0),volt0of5(1),
volthalfof5(2),
volt5of5(3),
volt0of10(4),
volt5to10(5),
volt10of10(6),ma0(7),
ma2(8), ma4(9),
ma10(10),
ma12(11),ma20(12),
ma22(13),ma24(14)}
setup -> outputs -> digOutSetup-> digOut1Setup
OID Name Access Description Syntax
x.2.2.2.2.1.1.0 digOut1description read-write Digital Out 1 description DisplayString
x.2.2.2.2.1.2.0 digOut1mode read-write Digital out 1 mode
Integer {
onoff(0),pwm(1)}
x.2.2.2.2.1.3.0 digOut1pulseWidth read-write Digital out 1 Pulse x100ms Integer32
x.2.2.2.2.1.4.0 digOut1controlledBy read-write Digital out 1 control logic
Integer {
webORm2m(0),
shedule1(1),
shedule2(2),
shedule3(3),
shedule4(4)}
x.2.2.2.2.1.5.0 digOut1reststate read-write Digital out 1 restart state
Integer {
lastState(0),
on(1),off(2),
percent0(3),
percent50(4),
percent100(5)}
setup -> outputs -> digOutSetup-> digOut2Setup
OID Name Access Description Syntax
x.2.2.2.2.2.1.0 digOut2description read-write Digital out 2 description DisplayString
x.2.2.2.2.2.2.0 digOut2mode read-write Digital out 2 mode
Integer {
onoff(0),pwm(1)}
x.2.2.2.2.2.3.0 digOut2pulseWidth read-write Digital out 2 Pulse x100ms Integer32
x.2.2.2.2.2.4.0 digOut2controlledBy read-write Digital out 2 control logic
Integer {
webORm2m(0),
shedule1(1),
shedule2(2),
shedule3(3),
shedule4(4)}
x.2.2.2.2.2.5.0 digOut2reststate read-write Digital out 2 restart state
Integer {
lastState(0),
on(1),off(2),
percent0(3),
percent50(4),
percent100(5)}