Teracom TCW280, Руководство пользователя

Страница: 13 / 34

TCW280_R1.2 – February 2019 Page 13
Here you set the operating mode for each output, its operating range, and the value after power
on. By default, it is the last remembered one.
For PWM mode, the frequency can be selected from a drop-down menu, but it is the same for
all outputs.
For ON/OFF mode, the pulse duration can be different for every digital output. The pulse
duration can be in a range of 0.1 to 999999 seconds.
6.2.2.3. Relays
For every relay, a description up to 15 characters can be set. The description is used to specify
the relay on Monitoring page and XML/JSON files.
Here you can choose how the relay will be activated as well as its status after the power is
turned on. By default, it is the last remembered one.
The pulse duration can be different for every relay. It can be in a range of 0.1 to 999999 seconds.
6.2.3. System
On this page, some general settings can be made.
6.2.3.1. General
The information in this section serves to identify the device in M2M communication.
6.2.3.2. WEB access
In this section, WEB access authentication can be deactivated. By default, authentication details
are admin/admin. It is strongly recommended to change them in “Administration->User/Pass”.
HTTP port for WEB access can be changed. This is useful for some routers which don’t support
different outside/inside ports for port forwarding. By default HTTP port is 80.
6.2.3.3. HTTP API
In this section, HTTP API access authentication can be activated/deactivated. By default it is
active.
Authentication details are same as WEB access. The controller support two types of
authentication – see an explanation for HTTP API below.