4.3.
Electrical characteristics
Table 9 - TeraRanger Evo Swipe
Plus
power consumption
Parameter
Minimum
Maximum
Average
Power supply
Voltage input (V)
Current consumption (mA)
4.5V
25mA
5.5V
75mA
5V
50mA
Interface logic levels
(referenced to +3V3)
LOW
HIGH
-
2.3
1
-
-
-
5. USB/UART Normal Operation
5.1.
Operating Modes of the TeraRanger Evo Swipe Plus
sensor
The TeraRanger Evo Swipe Plus features 4 modes:
●
Bidirectional PeopleTraffic Detection Mode
●
Presence Detection Mode
●
Engagement Trigger Mode
●
Gesture Recognition Mode (includes Swipe and Validation sub-modes)
5.1.1.
Bidirectional People Traffic Detection Mode
In Bidirectional People Traffic Detection Mode, the sensor counts people passing in
front of the TeraRanger Evo Swipe Plus.
The output of the sensor is:
●
A meter counting the number of people passing by, from left to right
●
A meter counting the number of people passing by, from right to left
The sensor should be installed with the USB/UART Connector on the right side as shown
in figure 9.
Copyright
©
Terabee 2020
Terabee, 90 Rue Henri Fabre
01630, St Genis-Pouilly, France (next to CERN)
16/29
