This photo corresponds to the depth images shown.
5. Switching between range modes
Terabee 3Dcam 80x60 offers 2 operating range modes. You can select between:
●
Close range mode (0.2m to 1.2m)
●
Standard mode (1.2m to 4m)
Standard mode is set as default. To switch between operating range modes, you will
need to edit the “ModuleConfig.json” file. Depending on your operating system, this file
will be located in the following directories:
●
Windows: C:\Program Files\TERABEEToF\ModuleConfig.json
●
Linux: /usr/etc/TERABEE/lib
To edit the file in Windows please locate and run the text editor with elevated privileges
- this can be done with “right-click” > “Run as administrator”. Next, in the top bar
menu select File > Open.. (or Ctrl+O) and import the “ModuleConfig.json” file.
To edit the file in Linux, please launch your text editor with elevated privileges with the
“sudo” command.
As a final step to select an operating range mode, please use a text editor tool to update
the “lens_mode” parameter with following values:
●
1 for “Standard mode“
●
0 for “Close range mode”
Copyright
©
Terabee 2019
Terabee, 90 Rue Henri Fabre
01630, St Genis-Pouilly, France (next to CERN)
15/17
