4.2 Software setup for Windows
4.2.1 SDK installation
An SDK is available for download on the Terabee website, providing users with drivers
for communicating with the camera, OpenNI code library and a visualization tool.
Terabee 3Dcam 80x60 SDK is compatible with OpenNI 2.2 frameworks.
Please download the SDK installation file by following this link:
(available in the downloads section of the Terabee 3Dcam 80x60 product page on
the Terabee website).
After downloading, please unzip the SDK and open the exe file. The package contains
OpenNI2.2 versions of the SDK for both x32 and x64 architectures. For the purposes of
this guide, the OpenNI 2.2 (x64) driver is used.
A window will open offering to proceed with SDK installation on your PC. To proceed,
click Install. During installation of the GUI, you might receive a notification from
Windows about an unknown application trying to start. In the “Windows protected your
PC” screen select More info > Run anyway to proceed with SDK installation and please
be advised that running this application will not put your PC at risk.
As a last step to complete your installation, please select the option to restart your PC
and click Finish.
Copyright
©
Terabee 2019
Terabee, 90 Rue Henri Fabre
01630, St Genis-Pouilly, France (next to CERN)
10/17
