Marquee™ Point-to-MultiPoint Series User Guide
Figure 2.1 – Marquee P-MP LEDs
(a) Flat Panel (FP) Version
(b) Ruggedized (EX) Version
:
d with all-weather electrical tape, Permagum, or
he Marque
pole mounting bracket (A) that is secured to the pole
P FP Mounting Hardware
N-Type
Connector
for External
Antenna
2.5
Hardware Installation – FP Enclosure
NOTE
All connectors must be properly water-proofe
equivalent. Do not use Silicon glue.
e P-MP FP unit is installed by using a
T
with a pivot adaptor bracket (B), a pole clamp (C), and a U-bolt (D). Figure 2.2 shows the hardware
provided to mount the Marquee P-MP FP unit.
Figure 2.2 – Marquee P-M
Pole
Clamp (C)
U-Bolt (D)
Pivot Adaptor
Bracket (B)
Pole Mounting
Bracket (A)
he integrated antenna can be mounted either vertically or horizontally polarized. The label located on
T
the back of the unit contains an arrow indicating the antenna’s polarization (see Figures 2.3a and b).
Please note that both ends of the link must use the same polarization. Be aware that most omni
antennas are vertically polarized and if the Marquee P-MP FP is aimed at one, it must be installed
vertically polarized, i.e., with the polarization arrow up and down.
Version 1.3(a)
Page 4
Jul 2005
