3
regUlatory notICeS
about electro-Magnetic Interference
This is a Class A product. In a domestic environment this product may cause radio
interference, in which case the user may be required to take adequate measures.
This product may cause interference if used in residential areas. Such use must be
avoided unless the user takes special measures to reduce electromagnetic emissions to
prevent interference to the reception of radio and television broadcasts.
In Canada
This Class A digital apparatus complies with Canadian ICES-003.
In the US and plaCeS Where the FCC regUlatIonS are applICable
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to case harmful interference, in
which case the user will be required to correct the interference at his own expense.
Instructions to Users
Some cables have to be used with the core set. Use the accessory cable or a designated
type cable for the connection. For cables that have a core only at one end, connect the
core to the projector.
CAUTION
Unapproved changes or modifications may void the user’s authority to operate the
equipment.
