11
preparIng the reMote Control
Please insert the batteries into the remote control before use. If the remote control starts
to malfunction, try replacing the batteries. If you will not use the remote control for an
extended period, remove the batteries and store them in a safe place.
1. Hold the hook part of the battery cover to
remove it.
2. Align and insert the two AA batteries
according to their plus and minus terminals, as
indicated in the remote control.
3. Replace the battery cover in the direction of the arrow and snap it back into place.
NOTE
n
Try changing the batteries when the remote control
malfunctions.
n
This remote control works with the remote sensors
on the projector using infrared light (Class 1 LED). The
active sensor will sense the remote control signal
assigned within 60 degrees to right and left, and within
3 meters.
n
Prevent the remote sensors from being hit by a strong
ray. It may cause a malfunction.
WARNING
n
Always handle the batteries with care and use them only as directed. Improper use may
result in battery explosion, cracking or leakage, which could result in fire, injury and/or
pollution of the surrounding environment.
n
Only use the batteries specified. Do not use batteries of different types at the same
time. Do not mix a new battery with used one.
n
Make sure the plus and minus terminals are correctly aligned when loading a battery.
n
Keep a battery away from children and pets.
n
Do not recharge, short circuit, solder or disassemble a battery.
n
Do not place a battery in a fire or water. Keep batteries in a dark, cool and dry place.
n
If you observe battery leakage, wipe out the leakage and then replace a battery. If the
leakage adheres to your body or clothes, rinse well with water immediately.
n
Obey the local laws on disposing the battery.
