12
tUrnIng on the poWer
1. Make sure the power cord is firmly and correctly
connected to the projector and the outlet.
2. Make sure the
poWer
indicator is steady
orange.
3. Make sure there is nothing obstructing the lens
door while it is opening. Press the
Standby/on
button on the projector or the remote control. The
lens door will open, the projection lamp will light
up, and the
poWer
indicator will begin to blink
green. When the power is completely on, the
indicator will stop blinking and light steady green.
WARNING
n
Never look into the projection lens or mirror while the projection lamp lights,
since the projection lamp ray may cause a trouble on your eyes.
n
Be careful not to pinch your finger with the lens door, to prevent an injury.
n
Do not place the projector vertically with the lens door open as shown in the
figure on the right. It may cause malfunction or injury.
n
Do not stand under the projector mounted on the wall or ceiling when its lens
door is opening or closing. Moreover, do not look at the mirror when the lens door
is opening or closing.
n
Never touch a lens door or mirror. If the mirror is broken, the projected image will
be distorted. Close the lens door and contact your dealer.
NOTE
n
Please power on the projector prior to the connected devices.
n
The projector has the DIRECT POWER ON function, which automatically turns on the
projector.
