17
CleanIng and replaCIng the aIr FIlter
Please check and clean the air filter periodically. When the indicators or a message
prompts you to clean the air filter, comply with it as soon as possible. If the filters are
damaged or heavily soiled, replace them with the new ones. To prepare the new filters,
contact Teq with the following type number:
type number : MU06481 (Filter set)
When you replace the lamp, please replace the air filter. An air filter of specified type will
come together with a replacement lamp for this projector.
1. Turn off the projector, and unplug the power cord. Allow
the projector to sufficiently cool down.
2. Use a vacuum cleaner on and around the filter cover.
3. While supporting the projector with one hand, use your
other hand to pull the filter cover forward in the direction
of the arrow.
4. Use a vacuum cleaner for the filter vent of the projector
and the outer side of the filter unit.
5. Take out filters while holding the filter cover.
6. Use a vacuum cleaner on both sides of the filters. When
vacuuming up the fine meshed filter, hold it so it will not
be sucked in. If the filters are damaged or heavily soiled,
replace them with the new ones.
7. Put the filters back into the filter cover. Put the coarse
meshed filter into a filter cover first. Then put the fine
meshed filter on the coarse meshed one, turning its
stitched side up.
8. Put the filter unit back into the projector.
9. Turn on the projector and reset the filter time using the
FILTER TIME item in the EASY MENU.
(1) Press the
MenU
button to display a menu.
(2) Point at the FILTER TIME using the
/
button, then press the
button. A dialog
will appear.
(3) Press the
button to select “OK” on the dialog. This will reset the filter time.
