12
adjUStIng the projeCtor’S elevator
If the projector is placed on an uneven surface, use
the elevator feet to place the projector horizontally.
The feet can also tilt the projector to project at
a suitable angle to the screen by elevating the
front side within 14 degrees. This projector has 2
elevator feet and 2 elevator buttons. An elevator
foot can be adjusted by pushing the elevator button on the same side.
1. Hold the projector, and push the elevator buttons to loosen the feet.
2. Position the front side of the projector to the desired height.
3. Release the elevator buttons to lock the elevator feet.
4. After making sure the elevator feet are locked, put the projector down gently.
5. If necessary, the elevator feet can be manually twisted to make more precise
adjustments. Hold the projector when twisting the feet.
CAUTION
n
Do not handle the elevator buttons without holding the projector, since the projector may
drop down.
n
Do not tilt the projector, other than elevating its front within 14 degrees using the adjuster feet.
A tilt of the projector exceeding the restriction may cause a malfunction, or shorten the lifetime
of the projector.
To loosen an elevator foot, push the
elevator button on the same side.
Twist the foot, to finely adjust.
