14
tUrnIng oFF the poWer
1. Press the
Standby/on
button on the
projector or the remote control. The message
“Power off?” will appear on the screen for
about 5 seconds.
2. Press the
Standby/on
button again when
the message appears. The projector lamp will
go off, and the
poWer
indicator will begin
blinking in orange. Then the
poWer
indicator
will stop blinking and light in steady orange
when the lamp cooling is complete.
3. Attach the lens cover, after the
poWer
indicator turns in steady orange.
Do not turn on the projector for about 10
minutes or more after turning it off. Turning the projector on again too soon may shorten
the lifetime of some consumable parts.
WARNING
n
Do not touch around the lamp cover or the exhaust vents during use or just after use, since it is
too hot.
n
Remove the power cord for complete separation. The power outlet should be close to the
projector and easily accessible.
NOTE
n
Please power off all connected devices before powering off the projector.
n
The AUTO POWER OFF function can make the projector turn off automatically.
