5
6. DIMENZIJE
6. DIMENSIONS
7. PREGLED, ODRŽAVANJE, POPRAVAK I OBNAVLJANJE
7. INSPECTION, MAINTENANCE, REPAIR AND OVERHAUL
Potrebno je obavljati preglede i održavati sve dijelove uređaja
o kojima ovisi protueksplozijska zaštita sukladno normi
EN 60079-17, općim i posebnim uputama proizvođača i
Pravilnicima korisnika, a naročito:
da su kućište, svi dijelovi kućišta, zaštitno staklo i
brtve bez puknuća i oštećenja,
da je kućište potpuno zatvoreno sklopom zaštitnog
stakla,
da su uvodnica, čep, vijci kutnika brtve, vijak stezaljke
za uzemljenje pritegnuti nazivnim momentom.
Popravak, obnavljanje ili pregradnju kućišta obavlja
proizvođač ili od proizvođača ovlaštena pravna osoba,
originalnim dijelovima prema proizvodnoj dokumentaciji, a sve
sukladno normi EN 60079-19.
Ukoliko popravak i/ili obnavljanje i/ili pregradnju vrši treća
osoba, prestaje svaka odgovornost proizvođača za proizvod, a
izjava sukladnosti proizvođača postaje nevažeća.
Inspections are carried out in accordance with IEC 60079-17,
general and special conditions of manufacturer and users
Regulations and includes supervision of parts on which the
explosion protection depends, especially:
that the housing, all part of housing, protective glass
and gasket are without rupture and damage,
that the housing is completely closed with set of
protective glass,
that the cable gland, plug, connecting terminals,
screws of protective grid are tightened with nominal
torque.
All the repairs must be performed by the manufacturer or the
manufacturer's authorized personal using the original parts
according to the product documentation, all in accordance
with EN 60079-19.
If repair or any other procedure are performed on the product
by unauthorized person, all producer responsibility for the
product and the warranty and the manufacturer's Declaration
of conformity becomes invalid.
276±2
Ø
20
WARNING
DO NOT OPEN WHEN
ENERGIZED
AFTER DE-ENERGIZING DELAY
FIVE MINUTES BEFORE OPENING
2
0
8
±2
PLFS-N 100 LED -./. 230 V .. W
Medarska 69, Zagreb, Croatia
x
x
x
II 2G Ex db eb op is IIC T6 Gb
Made in Croatia
II 2D Ex tb op is IIIC T80° Db
....
... 19 ATEX .... P - DAT-
IP 66 -40
°C<Ta<+40°C/+50°C
2
4
0
±2
Ø13
Ø22
276±2
Ø
20
2
0
8
±2
2
4
0
±2
Ø13
Ø22
WARNING
DO NOT OPEN WHEN
ENERGIZED
AFTER DE-ENERGIZING DELAY
FIVE MINUTES BEFORE OPENING
Medarska 69, Zagreb, Croatia
x
x
x
II 2G Ex db eb op is IIC T6 Gb
Made in Croatia
II 2D Ex tb op is IIIC T80° Db
....
... 19 ATEX .... P - DAT-
PLFS-N 100 LED -./. 230 V .. W
IP 66 -20
°C<Ta<+40°C/+50°C
2
9
5
±2
2
8
8
±2
