Teo 7810, Руководство по установке

Страница: 66 / 84

Teo IP Phone 7810 TSG Series Installation Instructions
Page 66 13-280138 Rev. H
Problem Observed Remedial Action
AUTH PSWD=
DELETE CLEAR 123
The AUTH PSWD (password) is a null value. Enter the
appropriate AUTH password.
PROXY=
DELETE CLEAR 123
The Proxy server address is a null value. Enter the
appropriate Proxy server IP address or server name.
REGISTERING LINES
The primary line has not registered with the SIP
server. Verify all entries (LINE ID, AUTH ID, AUTH
Password, all IP addresses and subnet mask) and re-
enter as required.
REGISTERING LINES
CONTINUE
The primary line has registered with the SIP server;
however, additional lines have not. Verify the LINE ID,
AUTH ID and AUTH passwords for all additional lines
and re-enter as required.
RESTART WITH NEW VALUES?
YES NO
Certain critical values have changed and a restart is
required. Select YES.
PHY:100MBPS IP:DHCP FAIL
Upon lease expiry, the phone was unable to negotiate
a new lease with the DHCP server. Verify that the
DHCP server is operating and accessible.
PING4 FAILED
PRESS ANY KEY TO EXIT
If all attempts to ping IP addresses fail, check Layer 2
802.1Q (VLAN) programming at the phone, using the
QoS menu.
If “LAYER 2 802.1Q=ON”, verify that the network
supports this packet prioritization standard. If it does
not, set LAYER 2 802.1Q to “OFF”. Ping valid
addresses using the ADMIN
→
DIAG
→
PING Menu.