Teo 7810 Скачать руководство пользователя страница 38

Страница: 38 / 84

Teo IP Phone 7810 TSG Series Installation Instructions

Page 38

13-280138 Rev. H

NAME=Nick Robinson
DELETE CLEAR abc

01-03: 4321
EDIT ADD REMOVE

LINE KEY OPTIONS ¤
ID NAME AUTHID PSWD

LINE KEY OPTIONS £¤
SHARE CODEC PTIME JTR

LINE KEY OPTIONS £
ADD

REMOVE

LABEL

SHARED LINE=DISABLED
ENABLE DISABLE

If the selected key is currently programmed as a line key, the display will show the key

number and line ID. A range of consecutive key numbers will be shown if the line ID is

assigned to multiple keys (a multiple line appearance group).

Select ADD to add the next key to the group. A group can contain up to five keys.
Select REMOVE to remove the last key from the group.

Select EDIT to change the settings for the key.

Select NAME.

Enter the caller ID display name with the dial pad, up to 24 characters maximum.

Caller ID name display may not be supported by some SIP servers.

Press the

key.

Line sharing as described below is for use with Avaya and other systems that support

shared lines. Leave the Shared Line setting disabled when connected to a Teo UC

system. The share setting is not used for multiple registrations of the same Line ID as

the primary line.

Press the Left or Right Arrow key repeatedly until SHARE is shown in the

menu.

The AUTHID (authentication ID) and PSWD (SIP authentication password)

may be required for this line, and the codec, ptime, and jitter buffer options

may need to be changed; consult your system administrator.

Select SHARE to control sharing of this line with other telephones.

Содержание 7810




















































































Результаты поиска

Содержание 7810

Отзывы:

Похожие инструкции для 7810

Бренды по названию

Популярные бренды

Teo 7810, Руководство по установке

Результаты поиска

Содержание 7810

Отзывы:

Похожие инструкции для 7810

Бренды по названию

Популярные бренды