Tenveo NV Series, Руководство пользователя

Страница: 5 / 47

Performance Characteristics
Product Description
1.Tech parameters
Electric Communication
Operation Surroundings
Physics Installation Method
Input Voltage
Power
Decoder
Horizontal Rotation
Vertical Rotation
Baud
Protocol
Address Set
Operating Environment
Operating Temp
Rotation Speed
Preset Point
Net-Weight
DC12V
12W
Internal
±175°
90°
9600/38400bps
VISCA/PELCO-D/PELCO-P
0~64
0°~+50°
0~95%
non-condensing
Support desktop,wall mount,ceiling mount and tripod installation
100°/s
Preset Point: 9 for remote
control,255 for PELCO,
64 for VISCA.
1.46kg
1
Thanks for choosing our NV series conference cameras. Please read this manual carefully before using the product.
1.Foreword
·To avoid damage from stress, violent vibration, soaking during transportation, storage and installation.
·Take care of each components of camera during installation, and install camera at where is affordable enough, to avoid drop
or scratches of camera case.
·Handle the camera parts gently, do not squeeze the camera units hard. Please do not touch the camera lens by hand
directly to avoid the lens scratched and image quality affected.
·Do not apply excessive voltage. (Use only the specified voltage) Otherwise, you may get an electric shock or a fire occur.
·Do not aim the camera at the sun or the other high luminous objects,otherwise it may cause image blurring or lens flare,
even cause permanent damage to the camera.
·Do not clean camera with active chemical or corrosive detergents, and remove dust or dirt on the surface of the lens with a
blower (Commercially available)
·Do not disassemble any camera components, in case of abnormal operation; contact your authorized dealer or the store
where you purchased the product.
(1) HD conference camera (2) DC12V power supply (3) Ceiling mount (4) Mounting screws
(5) Manual (6) Remote control (7) USB cable
2.Notice
3.Supplied accessories